鍍層測厚儀(測0-8mm涂覆)

Coating thickness gauge (measured 0-8 mm coating)

鋁層測厚儀是根據磁紅外感應方法而結構設計的。平常量測涂在鋼、鐵上的非磁塊鋁層體積尺寸，舉列漆、塑料管、瓷、鉻、銅、鋅等。

測試位置 : 0-8mm, 0-0.313 inches

采用 : 側量涂在鋼、鐵上的非磁鐵表層料厚

攝氏度區域 : -10ordmC to +40ordmC

檢測的標準 : um 和 inch

校正表明 : 10 um

高精度 : ±10um，大于等于 1mm 不高于 1/100.

Coating thickness gauge is using the principle and design of magnetic induction. Used to measure the besmear in the steel and iron the thickness of magnetic, such as paint, plastic, ceramic, chromium, copper, zinc, etc.

Measuring scope: 0-8 mm, 0 to 0.313 inches

Application: measurement in steel, iron coating on the magnetic coating thickness

Temperature range:-10 to ordmC + 40 ordmC

The measuring unit: um and inch

Measurement shows: 10 um

Precision: ± 10 um, more than 1 mm less than 1/100.

微信備注：我我司的能展示的驗測裝備保持前處里及后處里的品質質量，能展示外觀處里裝備。如要有詳細介紹材質請和我司的高技術人員鏈接。

Note: Our company adopts advanced technology and professional testing equipment before treatment and post-processing of guarantee quality, provides the first-class surface treatment equipment. If need detailed information, contact with our companys coating technology department.