噴涂料生產設備類別

STR-NKP-1型管網罐壁粉末噴涂器  Spraying machine for piping inner wall

◆適用人群依據 Applicable scope

采采用的小圓孔及大中型pvc管的壁內防腐蝕水性金屬漆，它是采用無氣防腐蝕涂料機卸料來的各類高壓水性金屬漆，依據定制的噴頭，使水性金屬漆吸霧后直接性養成揚聲器形（園錐型、實心），更加均勻地噴在pvc管內表層，最后實現目標pvc管的防腐蝕水性金屬漆。 NKP-1型基本適用性于Ф50-Ф300mm的排水管道，漆效果不許低于80秒（4號福特杯）。若內墻乳膠漆粘度指數過于80秒，需要萃取劑做好稀釋工作。NKP-1型大體上易受輸送管道間距限止，但最好的不生長于15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

裝配方框圖 Installation to which