鐵管前后壁拋噴丸除去機
◆好產品性能 Product features
螺旋管材內壁拋丸整理機用作于大、中、不同規格的中小型螺旋管材、瓶的外表清理和提高、鏜孔產品產品重新轉動、重新還有當地的民俗,鏜孔產品產品的運作強度可據鏜孔產品產品的規定要求開始立刻調整,可來設計成單管、雙管、3管、4管、遺傳變異后可保養中小型鋼塑管、儲油罐,化工新材料倉儲運輸罐鐵路橋車子等。
The outer steel wall of shot cleaning machine is used in large, medium and small steel tube, the cylinder's surface treatment and strengthening, workpiece rotating, automatic walk, the operation speed according to the requirements can be adjusted, can design the single pipe, double tube, 3, 4 pipe, tube variation can be clean up after large-scale pipe, oil tank, chemical storage tank railway vehicles and so on.
◆通常系統技術指標 Main technical parameters
清除垃圾鍍鋅鋼管的尺寸 Clean steel pipe size |
Φ300×5000mm |
拋丸器數 The number of shot peening machie |
2臺 |
輥道正常運行極限速度 Roller speed |
1-5m/min |
拋丸器電機功率 Shot peening machie power |
11kw×2 |
彈丸尺寸 Projectile diameter |
Φ0.8-Φ1.2mm |
拋丸量 The number of shot peening |
250kg/min×2 |
首屆彈丸放進量 The first projectile into amount |
800kg |
扇葉直經 Impellerdiameter |
Φ250mm |
進(出)料輥道寬度 Length of material into(out) the roller |
5000mm |
水泵葉輪速比 Impeller speed |
2930r/min |
輥距 Roller dimension |
400mm |
拋射車速 Aerosol propellant speed |
60-70m/s |
承載著體重 Load weight |
30kg/m |
升級機電功率 Hoist machine power |
3kw |
擺線緩速機工作功率 Cycloidal reducer power |
2.2kw |
提升自己量 Ascension of |
30/h |
過慮布袋條數 The number of filter bag |
36條 |
轉移量 Separation of |
30t/h |
凈化布袋規格參數 Specification of filter bag |
Φ120×5000mm |
橫面螺旋葉片輸出Longitudinal spiral power |
3kw |
整理風速 Processing air volume |
9800m3/h |
輸送帶量 Throughput |
30t/h |
安裝除塵設備制冷機熱效率 Dust electromotor power |
5.5kw |
總馬力 Total power |
37kw左右兩邊 |
振打電動機電功率 Vibration motor power |
0.75kw |
儀器造型長寬比 Shape dimension |
15000×4600×5000mm |