Q32系列作品輪胎式拋丸清理垃圾機

◆商品作用 Product features

本履帶拋丸處理機可以多品類，大中批量化出產鋁件的界面除銹防銹或拋丸突破，處理鋁件需求可不怕汽車碰撞的單重在150kg如下的鑄件及熱進行處理件，設備既可單機手機游戲運行，又可配線運行. 專屬鑄造自動化區間。

智能：將部件放進去聚氨酯履帶滾軸中，使用職工按壓“啟動”按鈕圖片，拋丸室門手動關，拋丸整理現在開始，履帶前進啟動，部件不斷的地去翻滾，強力拋丸器將拋丸高速的拋射進尚未翻滾的部件外壁上，部件可根本粗糙地擁有整理。鋼丸依據履加上的溜孔供應量錐齒輪減速機推送機，再將鋼丸推送去斗式升級機，經斗式升級機升級到轉移法器，被轉移法后保存待會兒用。拋丸結束了之后，拋丸室門智能已經打響，履帶翻轉，將部件卸出。

保養垃圾：終端服務器是再生利用高速度旋轉氣缸的扇葉將彈丸拋向履帶內間斷性旋轉的鋼件上，因而做到保養垃圾鋼件的原則。它適用人群于多列業中的小鑄件、鍛件、冷沖壓件、傘齒、扭簧等件的清砂、除銹處理、去陽極氧化皮和面上淬煉。機器是綜合管理國內的外水平，設計的概念開發技術的新物品，有的是種保養垃圾有效率好、設備構造狹窄、噪聲污染小、一整套的性好的保養垃圾設備。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆產品設備特征 Product features

1.機器選擇了懸臂離心分離式拋丸器，享有用使用壽命更長久和空間結構簡單化等特質。

2.主要包括BE型分割出來器，包括很好的分割出來郊果和分娩率，對增進樹葉有多方面的功能。

3.主要包括袋式降塵器，粉塵爆炸擺放酸度大于地區暫行規定的標準規定，大中國大地調節了操作方法者的勞動者區域環境。

4.主要采用防腐蝕天然橡膠履帶，緩減了對部件的正碰及損壞具體情況，削減了電腦的躁音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆常用區域 Applicable scope

      壓鑄件、精細儀器鑄件、精細儀器鍛件等的去掉、光飾。去掉熱除理件、鑄件、鍛件的表明被氧化皮。螺旋彈簧的強化。立即擰緊件防銹和前除理。

1、符合德八十五朝代末的噴砂機實施國產圖片化制造出。

2、選取直聯大力拋丸器，獲取速度好，拋丸量大。

3、風選破乳器、丸砂破乳率低于99%。

4、彈丸網絡覆蓋不均，無拋丸墻角。

5、耐用件運行壽命短長，換成更快。

6、設施設備低的噪音正常運作。

7、電采用了繼電子產品（或PLC）有效把控，有效把控柜、聲光提醒提醒安裝，PC按照西門子系統品脾，其主要原電子器件按照西門子系統中外合資品脾的操作簡潔、安全。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆首要科技技術指標 Main technical parameters